ОБНОВЛЕННАЯ ВЕРСИЯ!!! 

Топливный насос AEM 50-1000 340Л/Ч 40PSI 

AEM’s 340LPH High Flow In-Tank Fuel Pump is designed for high performance naturally aspirated and forced induction EFI vehicles. It delivers reliable performance and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps.

The AEM 340LPH High Flow In-Tank Fuel Pump (PN 50-1000) flows 340 lph (84 gph) at 40 PSI and is capable of supporting over 1,000 HP at 43 PSI.* Please see the flow curves and current draw vs. fuel pressure graphs on the specs tab for more information.

This fuel pump is designed for in-tank mounting for use with gasoline and features a compact 39mm diameter that fits most applications. It has an offset inlet design that eases installations and includes a wiring harness, pre filter, internal fuel hose and clamps, end cap and rubber buffer sleeve. Every pump is tested to flow 340 lph at 40 PSI before it is packaged for sale.

Designed for high output naturally aspirated and forced induction EFI vehicles
In tank design
Tested to flow 340 lph @ 40 PSI
39mm diameter fits most applications
Offset inlet design eases installation
Each pump individually tested
For gasoline vehicles
Kit includes fuel pump, rubber sleeve and end caps, pre filter, hose, clamps and flying lead

Обеспечивает надежную работу и большую производительность. Способен поддерживать более 1000 л.с. при давлении 43 PSI. *

В комплект входят необходимые элементы для установки (хомуты, изоляция, шланг, фитинг)

Технические характеристики:
Вес: 12.5oz (354grams)
Внешний диаметр: 39mm OD
Материал: Черная сталь с лазерной гравировкой
Параметры входа: 7.7mm ID, 11.0mm OD
Параметры выхода: 8 mm
PRV активация: 80 PSI

Характерристики напряжения:
Разъемы: 6 mm (+/-)
Min : 6 volts
Max : 18 volts
Токовое напряжение (40 psi): 12 amps (13.5v)
Токовое напряжение (80 psi): 15 amps (13.5v)